Individual belt holster, bags and backpacks

Individual belt holster, bags and backpacks



For more than 15 years rescue-tec is the expert for belt holster, bags and backpacks. All products were engineered in close collaboration with fire departments. In the meantime exists a complete collection of innovative carrying solutions. Even so never all wishes are fulfilled. So we are producing individual holster and bags for our customers.

Please contact us with your ideas, wishes and conceptions. Maybe you already have a drawing, sketch, sample or something similar. After an accurate counsel we design and produce a sample for you. To be able to respond quickly and flexibly we have an own workshop for our sample production.

Your contact person
Joachim Leiter
Phone: +49 6482 6089-17
j.leiter@rescue-tec.de

Here you can find a small selection of already implemented solutions. Depending on the field of application each institution has its own requirements.en.


rescue-tec Holster Krems ID-146
for rescue scissors

Developed for: Fire Department Krems

Version: Holster Cologne for scissors, without pen and wedge compartment

The fire department Krems approached with the desire for a single compact holster for the scissors Cologne. Only the scissors and no other equipment is placed inside the holster. This allowed to build it very narrow and shallow.

material: Cordura 1000D
dimensions: 21 x 8.5 x 4 cm


 


rescue-tec Mask Bag Airport Vienna ID-141 
 
Designed for: Vienna Airport Fire Department

The mask bag was developed in cooperation with the fire brigade of Vienna Airport for hold and protected the SCBA mask. The bag is attached to the back plate of the SCBA with a strap. The safety push button can only be opened in a defined direction. This feature protects the bag against loss if there is an inadvertent force. The large cover plate has a good grip, so that the bag is easy to open even with gloves.

material: Cordura, red
dimension: 32 x 32 cm


rescue-tec Holster Bruchsal ID-131
for rescue scissors and tubular loop

Designed for: Fire Department Bruchsal

Variant: Holster Heidelberg with additional compartment for tubular loop, without pen compartment

In cooperation with the fire department Bruchsal, the Holster Heidelberg was supplemented with an attached compartment for a tubular loop (1.80 m). The loop can be easily removed by a pull-out system. In addition, the pull-out loop closes the compartment and safe against loss. The elastic safety strap for securing the scissors is placed in a separate compartment.

material: webbing, Cordura
dimensions: 23.5 x 7 x 7 cm

 
 
 


rescue-tec Rope Pouch Bruchsal ID-130
for 30 m rescue-rope or 100 m guide line

Designed for: Fire Department Bruchsal
 
Version: Rope Pouch for SCBA attachment with additional compartments for door marking straps and 3D wedges, carabiner and permanent marker

The fire department Bruchsal had the desire for a rope pouch with SCBA. In addition, there should be space for door marking straps with stopper and other equipment. The diameter of the rope pouch has been increased and extended by a compartment for an escape hood, which offers sufficient space for door marking straps and stopper. On the side, a compartment has been fitted with space for two 3D wedges, one HMS carabiner and a permanent marker.

material: Cordura, black
dimensions: 52 cm x Ø 14 cm


rescue-tec Rope Pouch Bruchsal ID-129
for 30 m rescue-rope or 100 m guide line

Designed for: Fire Department Bruchsal

Version:
Rope Pouch for SCBA attachment with additional compartments for escape hood and 3D wedges, carabiner and permanent marker

The fire department Bruchsal had the desire for a rope pouch with SCBA attachment, which provides additional space for an escape hood (without packaging) and other equipment items. The rope pouch is at the top extended with the compartment for the escape hood. On the side, a divided compartment is fitted with the space for two 3D wedges, an HMS carabiner and a permanent marker. The rope pouch is blue, so it´s easy to get a clear differentiation to other rope pouches with different loading.

material: Cordura, blue
dimensions: 52 cm x Ø 14 cm


rescue-tec Rope Pouch Burladingen ID-121
for 30 m rescue rope/100 m guide rope and an evacuation mask

Developed for: Fire Brigade Burladingen

Version: Rope Pouch with BA-fixing and additional compartment for evacuation mask

In 2017, the fire brigade Burladingen requested privately labeled rope pouches. In addition to the rope pouches with BA-fixing (HO-01215), a version of this bag with a red colored compartment for the evacuation mask was created.

material: Cordura
dimensions: 57 cm x Ø 14 cm


rescue-tec Rope Pouch Brannenburg ID-109
for 30 m rescue-rope/100 m guide line and an escape hood

Developed for: Fire Department Brannenburg

Version: Rope Pouch with SCBA attachment with side compartment for rescue blanket

The fire department Brannenburg approached us with the desire to design the rope pouch with SCBA attachment and with an attached compartment for a rescue blanket according to EN 1865.

material: Cordura
dimensions: 40 cm x Ø 14 cm + 6 cm


rescue-tec Rope Pouch Mainz ID-104
for 30 m rescue-rope, for optional attachment to the shoulder strap or at the SCBA

Designed for: Fire Department Mainz

Version: Rope Pouch with SCBA attachment, additionally with D-rings for shoulder strap

In 2016 the fire department Mainz contact us with the desire for a rescue-rope pouch with the option for attachment at the SCBA or carrying with the shoulder strap. We design a pouch with a removable SCBA hook. The pocket thus released can be used to store the hook-off strap. In the case of using the shoulder strap, the hook and the hook-off strap don´t interfere this carrying system. Conversely, the shoulder strap is safely looked when the rope pouch is carrying by the SCBA hook.

material: Cordura
dimensions: 40 cm x Ø 14 cm


rescue-tec Rope Pouch with Compartment for Evacuation Mask ID-95, for 30 m rescue rope/100 m guide rope and an evacuation mask

Developed for: various fire brigades

Version:
Rope Pouch with BA-fixing (HO-01215) with additional compartment for evacuation mask

Since the introduction of the “Interschutz“ in 2015, we received many inquiries about our linen bags with an additional compartment for an evacuation mask (w/o packaging). With model ID-95 the compartment for the evacuation mask is located at the side of the bag. The position of the compartment is chosen in such way that is does not interfere with the BA-fixing.

material: Cordura
dimensions: 40 x 14 x 21 cm


rescue-tec Holster Darmstadt ID-88
for rescue knife, permanent marker, HMS carabiner, tubular loop, and two 2D wedges

Developed for: Fire Department Darmstadt

Version: further development of Holster Darmstadt

In cooperation with the fire department Darmstadt we have revised the holster Darmstadt version 1. The tubular loop pocket has been enlarged and provides space for the 50 mm wide Tubular Loop (AS-05030). The double-sided wedge compartments are equipped with pull-out loops, which make it easy to remove.

The compartments are close at the top with loop fastener and protected against loss of the wedges. The cover plates have extended grips and you can connect elastic safety strap for securing the equipment.  

material: Cordura
dimensions: 17 x 14 x 11 cm 


rescue-tec Holster Weilmünster ID-87
for rescue shears and accessories

Developed for: Fire Brigade Weilmünster

Version: Holster Cologne for rescue shears (HO-01050), opening below, mounts to shoulder harness or waist belt

Shoulder harness for rescue shears Köln, alternatively a 2m band strap, and two 2D wooden wedges. The holster can be carried by the waist belt or by an elastic loop from the shoulder harness. For easy deployment, both wooden wedges are attached to the harness by velcro. The harness is also a precaution against accidental loss.

material: Cordura
dimensions: 21 x 8 x 7 cm


rescue-tec Holster Rheinfelden ID-84
for rescue shears and accessories

Developed for: Fire Brigade Rheinfelden

Version:
Holster Mechernich (HO-01040), wedges laterally, mounts to waist belt

Shoulder harness to accommodate various accessories, such as rescue knife, rescue shears “Köln“, two marker pens, several light rods, mini coupling spanners, hand wheel for wall hydrant, disposable gloves, 2m band strap and two wooden wedges. The wedges are attached laterally in wedge shaped pockets.

material: Cordura
dimensions: 12.5 x 22 x 8 cm


rescue-tec Holster Seligenstadt ID-83
for tubular loop with carabiner, knife, marking pen and timber wedges

Developed for: Fire Department Seligenstadt

Version: Holster Karlsruhe (HO-01010) with fixing eye for carabiner and compartments for 3D timber wedges

The holster was modified in collaboration with the fire department Seligenstadt. They asked for holster that could be fixed with a carabiner at the BA. Two timber wedges can be stored in the side compartments. The wedges are fixed with straps. Inside it has enough space for tubular loop with carabiner, knife and marking pens. The door marking ribbons are fixed with straps at the inside of the lid.
 
material: Cordura, black
dimensions: 22 x 18.5 x 10.5 cm


rescue-tec Evacuation Mask Holster Eschborn ID-77
for two escape hoods plus additional equipment 

Developed for: Fire Brigade Eschborn

Version: harness for two evacuation masks (HO-01061), with additional pockets for 3D wedges, marking tapes and band strap with snap hook, carried by shoulder harness

The harness accommodates two evacuation masks including packaging material. The external located compartment can accommodate a band strap with snap hook. The pockets to the front are intended for other accessories such as door marking tapes, wooden wedges, rescue knife, marker pens, etc.

The harness can be attached to the shoulder harness (AS-01140) or by a snap hook.

material: Cordura
dimensions: 29.5 x 12.5 x 26.5 cm


rescue-tec Clothing Bag Vienna ID-72
for complete outer clothing and more     

Developed for: Fire Department Vienna

Version:
Clothing Bag HuPF (TA-03005) with trolley system, additional compartments and multi-coloured print

The fire department Vienna asked for an individual, mobile solution for clothing, boots, helmet and accessories. Thus this rescue-tec clothing bag got a trolley system. The pocket at the side below the reflective stripes is printed with a multi-coloured picture and the fire brigade Vienna’s logo.

With the shoulder straps the bag can be carried as backpack. If the straps aren’t used they can be stored in a special compartment.

material: Cordura, black
dimensions: 90 x 36 x 39 cm


rescue-tec Holster Wunstorf ID-71
for an escape hood and a carrying sling    

Developed for: Fire Department Wunstorf

Version:
increased version of Holster Escape Hood (HO-01060) for an additional carrying sling

The holster was developed in collaboration with fire department Wunstorf. It provides enough space for an escape hood with overpack and a carrying sling. Inside the bag is divided in two compartments. The holster can be carried with a shoulder strap (AS-01140) or can be fixed with a carabiner.

material: Cordura, black
dimensions: 30 x 30 x 15 cm


rescue-tec Holster Wiesbaden II ID-63
for an escape hood plus additional equipment     

Developed for: Fire Department Wiesbaden

Version: Holster Escape Hood XL (HO-01065) with additional compartments for equipment and duplex closure to wear at the belt

The special importance at this holster was that it is very compact – the escape hood is inside without overpack. The side compartments are big enough for two 3D timber wedges and tubular webbing with HMS carabiner. The cords for door marking with closure are fixed in the front compartment and can be taken out single.

material: Cordura, black
dimensions: 20 x 18 x 11 cm


rescue-tec Rope Pouch with b.a.-fixing, red ID-56
for 30 m rescue rope/100 m guide rope

Developed for: Fire Department Bremerhaven

Version: Rope Pouch with b.a.-fixing (HO-01215) made from Cordura, red

The fire department Bremerhaven wished to have a rope pouch with b.a.-fixing in red colour. The intention was to have an optical separation (black and red) between pouches with different equipment.

This rope pouch can be fixed on nearly every breathing apparatus (for 2-bottle apparatus of limited suitability).

material: Cordura, red
dimension: 40 cm x diameter 14 cm


rescue-tec Aviation Oxygen Systems Bag ID-54
for emergency oxygen supply on cargo airplanes

Developed for: cargo airline
 
Version: RIT-Bag (AS-05025) in flame resistant material with further, diverse specifications

The transport bag has been developed for emergency oxygen supply of flight personnel on cargo airplanes. Life cargo, such as horses and pets are regularly checked and cared for by flight personnel. It is required to carry an oxygen supply and breathing mask to be able to quickly react to a sudden cabin depressurisation.

Important for the Aviation Oxygen Systems bag are the following features:

  •  the bag is made from fire retardant materials and produced according to aviation fire protection requirements
  • in case of emergency, the breathing mask can be instantly deployed
  • an aluminium core protects against possible mechanical impact
  • the bag has additional padding for carrying comfort
  • rapid check as part of the flight check by useful details and solutions
  • the oxygen level indicator is visible from the outside of the bag
  • the opening of the bag can be sealed
  • the inspection seals of the pressure container and breathing mask are visible from the outside
  • the bag has been marked with OXYGEN, loading direction (arrow and UP) as well as the inventory-/part number

material: fire resistant
dimensions: 23 x 79 x 17 cm

data sheet (771 KB)


rescue-tec Backpack Vienna ID-52
for protective equipment against falls 

Developed for: Fire Department Vienna

Version: Backpack Door Opening (TA-02400) with logo and adapted partition

The wish of the oldest professional fire brigade of the world was the backpack door opening, printed with their own logo for keeping and transportation of door opening equipment. The partition in different shelves should give a fast overview and a selective removal of the equipment.

material outside: Cordura, black
material inside: Polyester, PVC-coated
dimension: 56 x 37 x 21 cm
 


rescue-tec Rope Pouch Hermeskeil ID-44
for 30 m rescue rope/100 m guide rope plus additional equipment

Developed for: Fire Department Hermeskeil/Niederneisen

Version:
Rope Pouch Hochheim (HO-01217) made from Nomex, with adapter for holster and possibility for fixing on the b.a.

The fire department Hermeskeil wished to have a rope pouch with additional shelves. In addition the pouch should have the following properties: Material from Nomex, fixing on the b.a. and adapter-system for fixing of additional holster. The clips and straps were made from fire resistant, respectively self-extinguishing material.

It is to carry like a standard rope pouch over the shoulder. In addition it is possible to fix it on the b.a. by a hook. The additional shelf has space for equipment like rescue-knife, Scissors Cologne, tubular loop with carabiner, timber wedges plus markers.

material: Nomex III, blue
dimension: 40 cm x diameter 14 cm


rescue-tec Holster Spenge ID-41
for door-marking plus additional equipment 

Developed for: Fire Department Spenge

Version: Holster Düsseldorf (HO-06340) with two shelves for timber wedges and shelf for door-marking cords

The fire department Spenge asked us to upgrade the fire resistant Holster Düsseldorf (for one tubular loop with HMS-carabiner) with two 3D timber wedges and 5 ribbons for marking doors. The ribbons should be locked and removable from the outside. For this, loops were brought in the cover flap which permits the removal without opening the holster. An additional mounted tight shelf in front of the backside avoids sliding off the ribbons. The timber wedges are positioned in separate, closed shelves on the cover flap.

material: fire resistant, anthracite
dimension: 14.5 x 12.5 x 5 cm


rescue-tec Rope Pouch Alzenau ID-35
for 30 m rescue rope/100 m guide rope plus additional equipment

Developed for: Fire Department Alzenau

Version:
Rope Pouch with b.a.-fixing (HO-01215) with shelves for additional equipment and fixing for the timber holding device

For the fire department Alzenau we engineered a version of the rope pouch with b.a.-fixing. The wish was to have an additional shelf for tubular loop and HMS-carabiner, one shelf for two 3D timber wedges and one shelf for markers and a rescue knife. In addition the timber holding device of the rope should be fixed on the outside of the pouch. On this version we did not use any reflex material.

material: Cordura, black
dimension: 50 cm x diameter 14 cm, with shelves 17 cm


rescue-tec Holster Fuldatal ID-34
for scissors Cologne 

Developed for: Police helicopter squadron Fuldatal

Version: Holster Heidelberg (HO-01100) for fixing at the thigh or shank

The helicopter squadron came up to us with the wish for fixing the scissors  Cologne at the thigh or shank to release themselves fast and easy from the seat belt. In this case the Holster Heidelberg with shoulder strap fixing opened up. The fastening from hook-and-loop tape and elastic brushed wool ribbon has been extended accordingly. According to the original also here the scissors can be taken out downwards. The elastic safety strap protects against losing.

material: Belt strap
dimension: 22 x 5 x 2.5 cm


rescue-tec Holster Iserlohn ID-28
for one escape hood plus additional equipment

Developed for: Fire Department Iserlohn

Version: Holster Escape Hood (HO-01060) with additional shelves for tubular loop (200 cm), Scissors Cologne with reel-in Key-Bak, two markers, carabiner, two 3D wedges and four cords incl. lock for door-marking

The Holster can be carried over the shoulder or by the Duplex-lock on the b.a. or safety-belt.

material: Cordura, black
dimension: 22 x 25 x 15 cm

 


rescue-tec Quick Response Bag Marburg ID-23
for 30 m D32-hose and nozzle

Developed for: Fire Department Marburg

Version:
Quick Response Bag de Vries made from red canvas material, without front bag, with single fixing for hose/nozzle

2008 the Marburg fire department wished to have a quick response bag for 30 m D32-hose. Following parameters were demanded: Analog design to the quick response bag De Vries, but suitable for a bigger hose, easy to clean, deviate from colour black and fixing of a nozzle and D-coupling with hook-and-loop tapes.

material: Canvas, red
dimension: 49 x 51 x 6 cm


rescue-tec Holster Solingen ID-20
for one escape hood plus additional equipment

Developed for: Fire Department Solingen

Version: Holster Escape Hood (HO-01060) made from Nomex, with additional shelves for tubular loop (150 cm), mini coupling key, two markers and carabiner

This holster can be fixed on the b.a. belt or couple. Alternatively it has a loop for a flexible fixing by a carabiner or strap.

material: Nomex, dark blue
dimension: 22 x 20 x 12 cm
 


rescue-tec Holster Gross-Gerau ID-19
for Scissors Cologne plus additional equipment

Developed for: Fire Department Gross-Gerau

Version: Holster Cologne (HO-01050) with addition shelf for one tubular loop

Slim belt holster for scissors Cologne, one timber wedge and one marker. The additional shelf with bottom opening has space for one tubular loop (AS-03010) and one HMS-carabiner.

material: Cordura, black
dimension: 23 x 7.5 x 9 cm




 


rescue-tec Rope Pouch Garching ID-16
for 30 m rescue rope/100 m guide rope plus one carrying sling 

Developed for: Fire Department Garching

Version:
Rope Pouch with Hook for the b.a. (HO-01215), with lateral shelf for one carrying sling

For using as way back safeguard for b.a. users. In the lateral shelf (20 x 5 x 14 cm) is enough space for a carrying sling which can be removed easily by a pull out loop.

material: Cordura, black
dimension: 40 cm x diameter 14 cm


rescue-tec Bag ID-14
for two escape hoods

Version: two Holster Escape Hood (HO-01060) sewed together on the backside, without Duplex-lock

For transportation and protection of two escape hoods (incl. covering box). Because of the dimension it can’t be carried at the safety belt. As an option for carrying a shoulder strap is recommended.

material: Cordura, black
dimension: 20 x 15 x 16 cm
 


rescue-tec Holster Dahner Felsenland ID-10
for an escape hood plus additional equipment

Developed for: Fire Department Dahn

Version:
Holster Escape Hood XL (HO-01065) with additional shelves for equipment and two straps for fixing on the b.a. or safety belt

It was attached importance to the extension of additional shelves for knifes and wedges. The holster also can be carried by a shoulder strap. It has space for an escape hood incl. covering box, one tubular loop with carabiner or one mini coupling key, one knife, markers and two wedges.

material: Cordura, black
dimension: 22 x 15 x 10 cm


rescue-tec Holster Neu-Isenburg ID-4
for an escape hood plus additional equipment  

Developed for: Fire Department Neu-Isenburg

Version: Holster Escape Hood XL (HO-01065) with additional shelves for equipment and duplex closure with emergency release device according to DIN 14922

In several tests with breathing protection and in training container together with the fire department Neu-Isenburg we developed this holster. Important specifications are the material Nomex and the emergency release device. The reflective stripes in red-silver-red shall prevent confusion between the jacket stripes and the holster. Furthermore it is clearly visible if the stuff is equipped with the holster. It has space for one escape hood, five cords to mark the doors, two timber wedges, one knife, and one marking pen.
 
material: Nomex, darkblue
dimensions: 25 x 21 x 11 cm


rescue-tec Holster Gernsheim ID-2
for one tubular loop and two timber wedges

Developed for: Fire Department Gernsheim

Version: Enlarged Holster Kleinwalsertal (HO-01110)

For fastening on the shoulder strap of the b.a. with two elastic hook-and-loop tapes. With downward opening with one hand movement the loop is immediately ready to hand. With shelves on both sides for 2D-timber wedges (AS-03000).

material: Cordura, black
dimension: 15 x 9 x 4 cm