rescue-tec Rope Pouch Marktoberdorf, rtx® 950

Flame-retardant rope pouch for attachment to almost any breathing apparatus. (without contents)

Loading recommendation
30 m rescue rope (DIN 14920) or up to 100 m guide rope
1x fire escape hood

• flame resistant material, tested in a 6-burner test at 950 (± 50 °C) like respiratory protection full-face masks class 3
• emergency release appliance
• the mobility of the wearer is not inadmissible restricted
• the physical burden on the wearer is not increased disproportionately
• the protective function of other PPE is not endangered

material: rtx® 950
dimensions: 40 cm x 14 x 21 cm
weight: 0.36 kg

meets the following requirements of DIN 14922:2020-02 (Multi purpose bag for fire service use):
• 6.1.1 limited flame spread
• 6.1.3 tensile strenght
• 6.1.4 tear strength
• 6.1.5 dimension change
• 6.2 closure system
• 6.3.2 emergency release device
• 10 Instructions for use

This rope pouch for capturing fragments can be fastened to nearly every breathing apparatus. It is hooked with one hook to the top retention belt of the breathing air cylinder and fastened using a rubber band over the cylinder valve. The pouch can be hooked off using a handle (pulled upwards) and removed.

An emergency release appliance, which releases at a force of 250-300 N, minimises the risk of getting stuck.

The rope can be fastened on the inside of the pouch with a carabiner. This way, when using this as a means to secure a return route, a secure connection is assured. The escape opening on the underside, which can be shut tight, makes it possible to prevent the rope running out in an uncontrolled way.

On the side of the rope pouch there is a compartment for a fire escape hood. The position of the additional compartment is chosen so that it does not interfere with the attachment to the b.a. (without content)

This pouch could be printed individual. More you will find there.